Build A Berm Kit (building a berm)
Build A Berm Kit (building a berm)
You can roll over

Berms - Building a Berm Kit

Build Your Berms Kit - Complete Kit $706.97 Build Your Berm- Straight Section $263.97 Build Your Berms - Corner $94.97 Build Your Berms - Connecting Collar $41.97 Build Your Berms - Floor Sealant $136.97 Build Your Berms - Vinyl Adhesive $20.97

How to Build a Spill Berm Kit

Sometimes off the shelf spill containment berms will not solve your needs. Regular tray type berms may not be applicable. Polyurethane berms are more for temporary use. A cement or iron angle curb is costly to plan, build and can end up being a trip and fall problem.

Now there is a new solution, our build your own spill berm kit. A custom spill containment berm kit comes complete with 50 feet of berm wall, corners, connector collars and the sealant/adhesive you need for quick installation. Additional sections and material can be purchased to handle any size area you need a berm.

So when you need a custom size berm to go around machinery to control spills or leaks or across a storage room entry to prevent liquids from running out all over the plant, the build your own berm is the solution. This spill berm kit can last for years if properly cared for and can be removed easily when no longer needed with a flat-bladed shovel.

Installation of this custom spill containment kit is as simple as cleaning the area the berm is to be installed on of any grease or oil so the sealant will seal properly. Repair any cracks or separations on the concrete with caulking. Lay out the berm over the area it is to be installed, apply a continuous bead of included floor sealant one inch in from the side the entire length. Apply pressure to seal it to the floor and add additional sealant as needed. Use the vinyl cover included in the custom spill containment kit on sections and corner joints. Let the sealant and adhesive cure for at least one hour before use. Complete instruction sheet found here

The covering of the berm walls and corners also included in the custom spill containment kit is a very durable vinyl that is resistant to coolants, oils and most chemicals. For increased safety the vinyl is a bright yellow color so it is easily seen and is less of a trip hazard.

Sections can be cut to size if needed with a razor knife.

The two inch high berm wall is filled with foam so it will spring back up if walked on or if light wheeled dollies or carts are rolled over it. A berm with the ability to move dollies and carts over it is a big plus for many needed applications such as storage rooms, cleaning rooms and hazardous chemical rooms.

We are here to help if you have any questions. Please contact us for chemical compatibility of the berm walls and sealant. Contact us by email or toll free at (800)869-9633.


Quick Overview

  • Build a high-visibility barrier to fit your needs.
  • Kit includes everything you need.
  • Durable, vinyl covering resists oils, coolants and most chemicals.
  • Cut to length and secure to floor with included sealant, then seal seams with the vinyl adhesive.
  • Economical for containment of leaks and spills.
  • Use around machinery, equipment and storage rooms.
  • Eliminates need to build expensive cement curbs.
  • Increased safety with yellow color.
  • Can be easily removed with flat-bladed shovel.


Technical Info

Refer to our berm assembly instruction sheet for additional technical information.

WARNING: This product can expose you to chemicals including1-2-Benzenedicarboxylic acid - di-C8-10-branched alkyl esters - C9-rich, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

The above warning applies to Items A8640U, A8644U, A8645U below

Compliance Info

40 CFR 122.26, 40 CFR 264.175, 40 CFR 112.7