Abzorb Oil Mat 6'x22'

Abzorb Oil Mats are heavy-duty, reusable oil absorbent floor mats designed for industrial facilities, garages, shops, and anywhere petroleum leaks and drips need to be contained. They absorb oil on contact while keeping floors clean, dry, and slip-free. Unlike disposable absorbent pads, Abzorb Mats are built for long-term use and can be wrung out and reused multiple times.

Abzorb Oil Mats absorb petroleum-based liquids including motor oil, hydraulic fluid, transmission fluid, diesel fuel, gasoline, gear oil, cutting oil, and other hydrocarbons. They are oil-selective, meaning they repel water while absorbing oil — making them ideal for wet shop environments and areas where water may be present.

Abzorb Oil Mats come in two width families: 3-foot wide (available in 3x3, 3x5, 3x8, 3x10, 3x50, and 3x150 feet) and 6-foot wide (available in 6x4, 6x8, 6x10, 6x12, 6x14, 6x16, 6x18, 6x20, 6x22, 6x50, and 6x150 feet). The smaller sizes are ideal for workstations and spot coverage, while the larger roll sizes cover entire aisles and shop floors.

Absorbency depends on the mat size. Smaller mats like the 3x3 absorb approximately 1 gallon, while larger mats absorb proportionally more. The 6x150-foot roll can absorb over 90 gallons of oil. The mats can be wrung out and reused, multiplying the total absorbent capacity over the life of the mat.

Yes. Abzorb Oil Mats are designed for repeated use. When saturated, wring out the absorbed oil into a waste container, and the mat is ready to absorb again. This makes them far more cost-effective than single-use disposable absorbent pads over time. Replace when the mat no longer absorbs effectively or shows signs of wear.

Abzorb Oil Mats are reusable, heavier-duty, and more cost-effective over time compared to disposable pads. Disposable pads are single-use and generate more waste. Mats stay in place better, cover larger areas, and can be wrung out and reused. For ongoing drip maintenance and permanent workstation protection, mats are the better choice. For quick spill cleanup, disposable pads offer convenience.

Common applications include under machinery and equipment, around hydraulic systems, in maintenance bays and repair shops, under vehicles and forklifts, along oil-handling walkways, around oil storage tanks, in manufacturing facilities, and anywhere petroleum drips or leaks are expected. They are used across automotive, manufacturing, military, aviation, and industrial sectors.

Yes. By absorbing oil on contact, Abzorb Oil Mats keep floor surfaces dry and reduce slip-and-fall hazards caused by oil-wet floors. The mat surface provides traction for foot traffic, supporting OSHA workplace safety requirements for maintaining clean, dry walking surfaces.

When an Abzorb Oil Mat reaches the end of its useful life, dispose of it according to your facility's waste management plan and local regulations. Mats saturated with non-hazardous petroleum products are typically classified as non-hazardous solid waste. Always follow your SPCC plan disposal requirements and check local regulations.

Yes. Abzorb Oil Mats support OSHA workplace safety requirements under 29 CFR 1910 for maintaining clean, dry floors and reducing slip-and-fall hazards. They are also a component of compliant SPCC (Spill Prevention, Control, and Countermeasure) plans at facilities that handle petroleum products.

Yes. Abzorb Oil Mats can be cut with scissors or a utility knife to fit specific areas, around equipment legs, or into irregular spaces. The roll sizes (3x50, 3x150, 6x50, 6x150) are especially useful for cutting custom lengths to fit aisles, walkways, and under long equipment runs.

Both are oil-absorbent floor mats, but Forklift Mats are reinforced with extra-heavy construction designed to withstand forklift traffic and heavy wheeled equipment. Standard Abzorb Oil Mats are ideal for foot traffic and stationary equipment areas. Choose Forklift Mats specifically for areas with forklift or heavy vehicle traffic.