Skip to content
Cart

Product Overview

The Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V provides emergency eye flushing capability as required by OSHA 29 CFR 1910.151(c). Designed to meet ANSI Z358.1 standards, this eyewash station delivers a controlled flow of tepid water to both eyes simultaneously for a minimum of 15 minutes.

Easy-to-activate with one hand, enabling injured workers to begin flushing immediately. Highly visible signage and bowl design guide users during emergencies when vision may be impaired.

Technical Specifications

Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V — Freeze-Protected Shower

Product Name Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V
SKU AH5GS45G-1HJ
Type Emergency Eyewash Station
Compliance ANSI Z358.1, OSHA 1910.151
Sold By AbsorbentsOnline.com

Compare Eyewash & Shower Stations

Compare models within your product category to find the right fit for your facility

Outdoor Safety Showers — Self-Draining vs Freeze-Protected

Compare self-draining and freeze-protected outdoor shower systems
Feature Self-Draining Freeze-ProtectedThis Type
How It Handles Cold Water drains out automatically after each use — no standing water to freeze Electric heat trace on pipes + insulation keeps water from freezing
Electrical Required? ✗ No — passive system ✓ Yes — 120V or 240V power required
Mounting Floor mount only Wall mount or floor mount
Combo Shower + Eyewash? ✓ Available (open bowl models) ✓ Available (closed ABS bowl)
Climate Rating Mild freeze zones (brief cold spells) Severe freeze zones (sustained sub-zero)
Pipe Options Galvanized or stainless steel Galvanized or stainless steel
ANSI Z358.1? ✓ Yes ✓ Yes
Price Range $1,362 – $2,531.77 $1,902.97 – $5,099.97

Regulatory Compliance & Standards

This product supports compliance with the following regulations:

OSHA Standards Supports workplace safety requirements under 29 CFR 1910
ANSI Certified Meets American National Standards Institute safety requirements

Expert Insights

ANSI Z358.1 requires eyewash stations within 10 seconds walking distance (approximately 55 feet) from any hazard. Tepid water (60-100°F) must flow for a minimum of 15 minutes. Weekly activation testing is mandatory — document each test with date and inspector initials.

Gravity-fed units require particular attention: replace water per manufacturer schedule (typically weekly to monthly depending on preservative used). For plumbed units, flush weekly for at least 3 minutes to prevent bacterial growth in stagnant water lines. Position stations on the same level as the hazard with no obstructions in the path.
Travis Zdrazil PCI Products — 40 Years in Industrial Spill Containment & Safety

Frequently Asked Questions

Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V

How often should I test the eyewash station?

ANSI Z358.1 requires weekly activation testing to flush stagnant water from supply lines and verify proper operation. Document each test with date and inspector name. Annual comprehensive inspections should verify flow rate, pattern, and water temperature.

How far should the eyewash be from the hazard?

ANSI Z358.1 requires the eyewash to be within 10 seconds travel time (approximately 55 feet) from any hazard. The path must be on the same level, free of obstructions, and well-lit. For strong acids and caustics, the distance should be even shorter.

What water temperature is required?

ANSI Z358.1 requires tepid water between 60°F and 100°F (16°C to 38°C). Cold water causes involuntary eye closure and hypothermia during the required 15-minute flush. Tempering valves are recommended for both hot and cold climates.

Does freeze-protected mean it works in all winter conditions?

Freeze-protected showers use electric heat trace with insulation to keep the water supply above freezing, even in sustained sub-zero temperatures. They require a dedicated 120V or 240V electrical connection. For mild freeze zones with brief cold spells, a self-draining system may be sufficient and costs less.

Why Customers Choose AbsorbentsOnline

Facilities, field crews and government buyers have ordered from us since 1985.

Cross-Reference Guide

This product is compatible with applications using the following part numbers and specifications:

  • AH5GS45G-1HJ
  • Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V

Freeze Protected Floor Mount Shower & Eyewash, Stainless Steel Pipe, Closed ABS Bowl, 120V. Professional-grade industrial safety product. AbsorbentsOnline SKU: AH5GS45G-1HJ. Contact us for cross-reference assistance with competitor part numbers.