Skip to content
Cart

Product Overview

Red/White Hazard Non-Slip Tape provides anti-slip traction with fire safety marking in the widest 6-inch format for ramps, platforms, and wide restricted areas. This single roll measures 6 inches wide by 60 feet long with aggressive mineral abrasive surface in the red-and-white diagonal stripe pattern. Apply with pressure-sensitive adhesive on clean, dry surfaces. Weight: 3 lbs per roll.

Technical Specifications

SKU A88618F Roll
Width 6 inches
Length 60 feet
Color Hazard Red/White
Packaging Single Roll
Weight 3 lbs
Surface Mineral abrasive anti-slip
Adhesive Pressure-sensitive peel-and-stick

Expert Insights

The 6-inch red/white stripe provides maximum coverage for ramps and platforms in fire safety zones and restricted access areas. The wide format makes the hazard pattern highly visible across broad stepping areas. One 60-foot roll covers approximately 15 ramp sections at 4 feet each. Ideal for emergency vehicle access ramps, fire exit paths, and wide restricted zones. For standard stair treads, 4-inch width is typically sufficient. For narrow step-edge marking, use 2-inch. Buy the 2-roll case (A88618F Case) for volume savings.
Travis Zdrazil PCI Products — 40 Years in Industrial Spill Containment & Safety

SINGLE ROLL 6-In Red/White Hazard Non-Slip Tape, 6 inch x 60 feet | Industrial Spill Containment

Wholesale & B2B Information

SINGLE ROLL 6-In Red/White Hazard Non-Slip Tape, 6 inch x 60 feet is used by municipalities, DOTs, construction firms for slip-and-fall prevention. Volume pricing available. Free shipping to the lower 48 states.

Frequently Asked Questions

SINGLE ROLL 6-In Red/White Hazard Non-Slip Tape, 6 inch x 60 feet

Where is 6-inch red/white tape best used?

Six-inch tape is ideal for wide ramps, fire exit paths, emergency vehicle access areas, and broad restricted zones where maximum visibility and anti-slip coverage are needed.

Is 6-inch too wide for stairs?

For standard stair treads, 4-inch width provides adequate coverage. Six-inch is best for ramps and platforms where wider coverage improves both safety and visibility.

How many linear feet per roll?

Each roll provides 60 linear feet of 6-inch-wide red/white hazard anti-slip tape.

Can this be used on outdoor metal ramps?

Yes. Apply to clean, dry metal surfaces for permanent adhesion. The mineral abrasive provides excellent traction in wet conditions.

Why Customers Choose AbsorbentsOnline

Facilities, field crews and government buyers have ordered from us since 1985.

Cross-Reference Guide

Red/White Hazard Non-Slip Tape is available in multiple widths as single rolls or cases.

  • {"part"=>"A88218F Roll", "description"=>"Red/White 2 in. x 60 ft. Single Roll"}
  • {"part"=>"A88218F Case", "description"=>"Red/White 2 in. x 60 ft. Case of 6 Rolls"}
  • {"part"=>"A88418F Roll", "description"=>"Red/White 4 in. x 60 ft. Single Roll"}
  • {"part"=>"A88418F Case", "description"=>"Red/White 4 in. x 60 ft. Case of 3 Rolls"}
  • {"part"=>"A88618F Roll", "description"=>"Red/White 6 in. x 60 ft. Single Roll (this product)"}
  • {"part"=>"A88618F Case", "description"=>"Red/White 6 in. x 60 ft. Case of 2 Rolls"}

Choose width based on application: 2 in. for step edges and narrow zones, 4 in. for stair treads and walkway borders, 6 in. for ramps and wide restricted areas. Cases offer volume savings.