Universal Absorbent Socks, Gray, 3 In x 8 Ft, 15/case

Gray universal absorbent socks absorb all liquid types — oil, water, coolant, solvents, and most non-aggressive industrial fluids. They are the most versatile sock option, ideal for facilities that handle multiple fluid types.

Lay socks around the perimeter of machinery, under leaking equipment, or along the edge of a spill to create a barrier. Overlap the ends of multiple socks to form a continuous dike. Socks conform to irregular surfaces and can be wrapped around pipes, hoses, and fittings.

Universal (gray) socks are available in three lengths: 3 in. x 4 ft. (30 per case), 3 in. x 8 ft. (15 per case), and 3 in. x 12 ft. (10 per case). Choose shorter socks for individual machines, longer socks for extended containment lines.

Socks are not connectable like booms, but you can overlap the ends to create a continuous dike of any length. Socks are flexible and conform to curves, corners, and uneven surfaces.

Universal (gray) socks absorb all liquids — oil, water, coolant, solvents. Oil-only (white) socks selectively absorb petroleum-based liquids while repelling water. Use universal when multiple fluid types are present; use oil-only when you need to separate oil from water or for outdoor use where rain is a factor.

Socks are incinerable, but disposal must comply with local, state, and federal regulations. Socks saturated with non-hazardous fluids may go to standard industrial waste. Socks used with hazardous materials require proper hazardous waste handling per EPA 40 CFR 263.

Yes. Universal absorbent socks support compliance with OSHA 29 CFR 1910.22 for workplace housekeeping, EPA SPCC (40 CFR 112) for petroleum spill prevention, and NPDES Stormwater regulations.

Yes. Volume discounts, pallet pricing, and government purchase orders are accepted. Contact [email protected] or call (800) 869-9633 for quotes.

The gray color is the universal industry standard for general-purpose absorbents. It instantly identifies the sock as safe for all non-aggressive liquids — oil, water, coolant, and solvents. White = oil-only, yellow = hazmat/chemical. Color-coding is an OSHA best practice that helps workers grab the right absorbent during a spill emergency.

Universal socks can be used outdoors, but they will absorb rainwater along with other fluids. For outdoor applications where rain exposure is expected and you only need to absorb oil, consider white oil-only socks instead — they repel water and float, making them far more efficient in wet outdoor environments.

Choose based on the area you need to protect: 4 ft. socks are best for wrapping around individual machines or fitting under equipment. 8 ft. socks provide extended coverage for workstation perimeters. 12 ft. socks are ideal for long runs along walls, doorways, or equipment bays where continuous containment is needed.