Skip to content
Cart

Product Overview

This taller urethane spill dike is for larger equipment, storage areas and floor drains. Each 10 ft section is 3.75 in wide and 2.25 in high and weighs 31 lbs. Corner connectors (AMR8018S) and section connectors (AMR8019S) are sold separately, so you can build straight runs or closed layouts. Blocking drains helps you stay compliant with your stormwater plan under 40 CFR 122.26.

The Connectable Spill Containment Dike provides mid-height containment for moderate spill volumes on smooth floor surfaces. Made from flexible polyurethane elastomer in green, this 10-foot dike stands 2.25 inches tall. To build longer runs, join sections with Section Connectors, sold separately; the ends do not snap together on their own. Measuring 10 ft. L x 3.75 in. W x 2.25 in. H and weighing 31 lbs, it delivers greater spill capacity than the standard Interlocking Dike while remaining portable for emergency response. Use Corner Connectors and Section Connectors for custom perimeter layouts. The flexible material conforms to minor floor irregularities and seals without adhesive.

Technical Specifications

SKU AMR8014S
Length 10 feet
Width 3.75 inches
Height 2.25 inches
Weight 31 lbs
Material Flexible polyurethane elastomer
Color Green
Connection Separate corner and section connectors, sold separately
Surface Smooth floors (concrete, tile, metal)
Accessories Corner Connector (AMR8018S), Section Connector (AMR8019S)
Warnings & RestrictionsUrethane Notice: Due to the nature of softer urethane, the physical properties of these products may change over time with exposure to certain environmental conditions like temperature, humidity, and UV radiation. Please inspect the stored product regularly to ensure it is in a usable state. These products are for temporary use only. Pick up after each use, clean, then store properly. Do not leave down for extended periods of time or drive over with vehicles.

Compare Spill Containment Berm Types

Choose the right containment berm for your application, setup speed, and vehicle access needs

Spill Containment Dike Comparison

Spill Containment Dike Products
Feature Table-Top Dike Interlocking Dike Connecting Dike Connectable DikeThis Product
Profile Size 1"W × ¾"H 2.25"W × 1.37"H 4"W × 4.5"H 3.75"W × 2.25"H
Length 4 ft. 10 ft. 5 ft. 10 ft.
Connection Method Butt together on surface ✓ Self-interlocking ends Dovetail ends connect directly Separate connector & corner pieces
Material Urethane Urethane Urethane Polyurethane
Best For Lab benches, work tables, small surfaces Standard floor perimeters, drain protection Higher containment volume, larger spills Custom layouts with corners & extensions
Weight 2 lbs. 20 lbs. 48 lbs. 31 lbs.
Price $110.97 $310.99 $420.99 $610.99
Shop View Table-Top → View Interlocking → View Connecting → ✓ You're viewing this

Dike Accessories

Dike Accessories and Connectors
Accessory Purpose Compatible With Price
Section Connector Joins two straight dike sections end-to-end Connectable Dike (10 ft.) $45.77
Corner Connector Creates 90° corners in dike perimeter Connectable Dike (10 ft.) $96.50
Carry Case Storage & transport case for dike sections All dike models up to 10 ft. $325.97

Small & Portable Containment Solutions

Small and Portable Spill Containment Comparison
Feature Mini Foam Wall Portable Drum Berm Pop-Up Pool Spill DikeThis Product
Type Small berm with foam walls Quick-deploy or snap-up drum berm Emergency containment pool Modular urethane barrier sections
Has Integrated Floor? ✓ Yes ✓ Yes ✓ Yes ✗ No โ€” perimeter barrier only
Deploy Speed Instant unfold Instant unfold or snap-up Instant pop-open Interlock sections on floor
Sizes 2×2 to 4×6 ft. 2×2 to 10×10 ft. 20 to 250+ gallon 4 ft. and 10 ft. sections
Best For Under machines, tight spaces Drum storage, 1-4 drum containment Emergency drip catching, portable jobs Floor perimeters, drain protection
Price Range $167 – $279 $257 – $1,511 $69 – $459 $45 – $610
Shop View Mini Foam → View Portable Drum → View Pop-Up Pools → ✓ You're viewing this

Regulatory Compliance & Standards

This product supports compliance with the following regulations:

Helps Meet EPA Supports Environmental Protection Agency spill response requirements
OSHA Standards Supports workplace safety requirements under 29 CFR 1910
SPCC Plan Support Supports Spill Prevention, Control & Countermeasure requirements (40 CFR 112)

Expert Insights

The Connectable Dike is the mid-range containment option at 2.25 inches tall, providing significantly more spill volume than the 1.37-inch Interlocking Dike. Sections need connectors to make a longer run: Corner Connectors (AMR8018S) create 90-degree turns and Section Connectors (AMR8019S) join straight runs. At 31 lbs per 10-foot section, this dike is heavier than the Interlocking model but still portable for emergency deployment. Best suited for moderate spill volumes on smooth concrete, tile, or metal floors. For maximum floor containment height, step up to the 4.5-inch Connecting Dike (APBL253S).
Travis Zdrazil PCI Products — 40 Years in Industrial Spill Containment & Safety

Urethane Spill Containment Dike, Connectable, 10 ft x 2.25 in High, Green | Industrial Spill Containment

Wholesale & B2B Information

Connectable Spill Containment Dike, Green, 10ft is used by industrial facilities, petroleum operations, fleet maintenance sites for industrial cleanup and maintenance. Supports OSHA and EPA SPCC spill containment compliance requirements. Volume pricing available. Free shipping to the lower 48 states.

Frequently Asked Questions

Urethane Spill Containment Dike, Connectable, 10 ft x 2.25 in High, Green

What connectors work with this dike?

Use the Corner Connector (AMR8018S) for 90-degree turns and the Section Connector (AMR8019S) for joining straight sections end-to-end.

How does this compare to the Interlocking Dike?

The Connectable Dike stands 2.25 inches tall versus 1.37 inches, providing significantly more spill volume capacity. It also supports corner and section connectors for custom layouts.

Is adhesive required for installation?

No. The flexible polyurethane seals against smooth floors through its own weight and conformability without adhesive or fasteners.

What surfaces does this work on?

Best on smooth concrete, tile, epoxy, and metal surfaces. The flexible material conforms to minor floor irregularities.

What is the difference between a spill dike and a berm?

Spill dikes are portable, modular barrier sections that you arrange in any configuration to contain spills on flat surfaces. Berms are complete enclosed containment systems with an integrated floor and walls. Use dikes for quick perimeter containment on existing floors; use berms when you need a complete containment basin including the floor.

Why Customers Choose AbsorbentsOnline

Facilities, field crews and government buyers have ordered from us since 1985.

Cross-Reference Guide

This product is compatible with applications that use the following part numbers:

  • SpillTech MR8014
  • UltraTech 2050
  • New Pig PLR204