Skip to content
Cart

Product Overview

This reusable urethane spill dike creates a low barrier around drains, equipment and work areas. Each 10 ft section is 2.25 in wide and 1.37 in high, weighs 13 lbs, and links to the next section so you can build the length and shape you need. Blocking drains helps you stay compliant with your stormwater plan under 40 CFR 122.26.

The Interlocking 10-Foot Spill Containment Dike creates instant containment barriers on any smooth floor surface. Made from flexible polyurethane elastomer in green, this dike features quick-connect interlocking ends that snap together to build custom containment perimeters of any length. Measuring 10 ft. L x 2.25 in. W x 1.37 in. H and weighing 13 lbs, it is portable enough for emergency spill response and durable enough for permanent installation. The flexible material conforms to uneven surfaces and seals against smooth floors without adhesive.

Technical Specifications

SKU ASPB10CS
Length 10 feet
Width 2.25 inches
Height 1.37 inches
Weight 13 lbs
Material Flexible polyurethane elastomer
Color Green
Connection Quick-connect interlocking ends
Surface Smooth floors (concrete, tile, metal)
Warnings & RestrictionsUrethane Notice: Due to the nature of softer urethane, the physical properties of these products may change over time with exposure to certain environmental conditions like temperature, humidity, and UV radiation. Please inspect the stored product regularly to ensure it is in a usable state. These products are for temporary use only. Pick up after each use, clean, then store properly. Do not leave down for extended periods of time or drive over with vehicles.

Compare Spill Containment Berm Types

Choose the right containment berm for your application, setup speed, and vehicle access needs

Spill Containment Dike Comparison

Spill Containment Dike Products
Feature Table-Top Dike Interlocking DikeThis Product Connecting Dike Connectable Dike
Profile Size 1"W × ¾"H 2.25"W × 1.37"H 4"W × 4.5"H 3.75"W × 2.25"H
Length 4 ft. 10 ft. 5 ft. 10 ft.
Connection Method Butt together on surface ✓ Self-interlocking ends Dovetail ends connect directly Separate connector & corner pieces
Material Urethane Urethane Urethane Polyurethane
Best For Lab benches, work tables, small surfaces Standard floor perimeters, drain protection Higher containment volume, larger spills Custom layouts with corners & extensions
Weight 2 lbs. 20 lbs. 48 lbs. 31 lbs.
Price $110.97 $310.99 $420.99 $610.99
Shop View Table-Top → ✓ You're viewing this View Connecting → View Connectable →

Dike Accessories

Dike Accessories and Connectors
Accessory Purpose Compatible With Price
Section Connector Joins two straight dike sections end-to-end Connectable Dike (10 ft.) $45.77
Corner Connector Creates 90° corners in dike perimeter Connectable Dike (10 ft.) $96.50
Carry Case Storage & transport case for dike sections All dike models up to 10 ft. $325.97

Small & Portable Containment Solutions

Small and Portable Spill Containment Comparison
Feature Mini Foam Wall Portable Drum Berm Pop-Up Pool Spill DikeThis Product
Type Small berm with foam walls Quick-deploy or snap-up drum berm Emergency containment pool Modular urethane barrier sections
Has Integrated Floor? ✓ Yes ✓ Yes ✓ Yes ✗ No โ€” perimeter barrier only
Deploy Speed Instant unfold Instant unfold or snap-up Instant pop-open Interlock sections on floor
Sizes 2×2 to 4×6 ft. 2×2 to 10×10 ft. 20 to 250+ gallon 4 ft. and 10 ft. sections
Best For Under machines, tight spaces Drum storage, 1-4 drum containment Emergency drip catching, portable jobs Floor perimeters, drain protection
Price Range $167 – $279 $257 – $1,511 $69 – $459 $45 – $610
Shop View Mini Foam → View Portable Drum → View Pop-Up Pools → ✓ You're viewing this

Regulatory Compliance & Standards

This product supports compliance with the following regulations:

Helps Meet EPA Supports Environmental Protection Agency spill response requirements
OSHA Standards Supports workplace safety requirements under 29 CFR 1910
SPCC Plan Support Supports Spill Prevention, Control & Countermeasure requirements (40 CFR 112)

Expert Insights

The interlocking dike is the simplest and most cost-effective containment dike option. The quick-connect ends allow you to snap multiple 10-foot sections together without separate connectors โ€” just push the ends together and they lock. The 1.37-inch height provides basic splash containment for small spills and drips. The flexible polyurethane conforms to minor floor irregularities, creating a seal without adhesive or fasteners. This dike works best on smooth concrete, tile, or metal surfaces. For taller containment barriers (2.25 inches or 4.5 inches), see the Connectable Dike (AMR8014S) or Connecting Dike (APBL253S) which provide greater spill volume capacity.
Travis Zdrazil PCI Products — 40 Years in Industrial Spill Containment & Safety

Urethane Spill Containment Dike, Interlocking, 10 ft x 1.37 in High, Green | Industrial Spill Containment

Wholesale & B2B Information

Interlocking Spill Containment Dike, Green, 10ft is used by industrial facilities, petroleum operations, fleet maintenance sites for industrial cleanup and maintenance. Supports OSHA and EPA SPCC spill containment compliance requirements. Volume pricing available. Free shipping to the lower 48 states.

Frequently Asked Questions

Urethane Spill Containment Dike, Interlocking, 10 ft x 1.37 in High, Green

Do I need separate connectors?

No. The interlocking ends snap together without additional connectors. Just push sections together to build any length.

What surfaces does this work on?

Best on smooth concrete, tile, epoxy, and metal surfaces. The flexible material conforms to minor irregularities.

Is adhesive required?

No. The flexible polyurethane creates a seal against smooth floors through its own weight and conformability.

How tall is the containment barrier?

1.37 inches. For taller barriers, see the Connectable Dike (2.25 in.) or Connecting Dike (4.5 in.).

What is the difference between a spill dike and a berm?

Spill dikes are portable, modular barrier sections that you arrange in any configuration to contain spills on flat surfaces. Berms are complete enclosed containment systems with an integrated floor and walls. Use dikes for quick perimeter containment on existing floors; use berms when you need a complete containment basin including the floor.

Why Customers Choose AbsorbentsOnline

Facilities, field crews and government buyers have ordered from us since 1985.

Cross-Reference Guide

This product is compatible with applications that use the following part numbers:

  • SpillTech SPB10C
  • UltraTech 2052
  • New Pig PLR212