Skip to content
Cart

Product Overview

The Lab Spill Containment Dike Tabletop from UltraTech is a flexible, reusable urethane barrier designed to create instant spill containment on flat laboratory surfaces. Measuring 4 feet long with a 1-inch wide by 3/4-inch high profile, this orange dike can be shaped around equipment, instruments, or work areas on benchtops, fume hood floors, and countertops to contain small chemical spills and drips before they spread. The urethane construction resists a broad range of laboratory chemicals including acids, bases, and solvents. At just 2 lbs, the dike is highly portable and can be repositioned as work areas change. Multiple dikes can be connected end-to-end for longer containment perimeters. The bright orange color provides immediate visibility for safety awareness. A dedicated storage case (A2104LTU) is available separately for organized transport and storage of multiple dikes.

Technical Specifications

SKU A2051LTU
Length 4 ft.
Width 1 in.
Height 3/4 in.
Material Urethane
Color Orange
Weight 2 lbs
Manufacturer UltraTech
Warnings & RestrictionsUrethane Notice: Due to the nature of softer urethane, the physical properties of these products may change over time with exposure to certain environmental conditions like temperature, humidity, and UV radiation. Please inspect the stored product regularly to ensure it is in a usable state. These products are for temporary use only. Pick up after each use, clean, then store properly. Do not leave down for extended periods of time or drive over with vehicles.

Compare Spill Containment Berm Types

Choose the right containment berm for your application, setup speed, and vehicle access needs

Spill Containment Dike Comparison

Spill Containment Dike Products
Feature Table-Top DikeThis Product Interlocking Dike Connecting Dike Connectable Dike
Profile Size 1"W × ¾"H 2.25"W × 1.37"H 4"W × 4.5"H 3.75"W × 2.25"H
Length 4 ft. 10 ft. 5 ft. 10 ft.
Connection Method Butt together on surface ✓ Self-interlocking ends Dovetail ends connect directly Separate connector & corner pieces
Material Urethane Urethane Urethane Polyurethane
Best For Lab benches, work tables, small surfaces Standard floor perimeters, drain protection Higher containment volume, larger spills Custom layouts with corners & extensions
Weight 2 lbs. 20 lbs. 48 lbs. 31 lbs.
Price $110.97 $310.99 $420.99 $610.99
Shop ✓ You're viewing this View Interlocking → View Connecting → View Connectable →

Dike Accessories

Dike Accessories and Connectors
Accessory Purpose Compatible With Price
Section Connector Joins two straight dike sections end-to-end Connectable Dike (10 ft.) $45.77
Corner Connector Creates 90° corners in dike perimeter Connectable Dike (10 ft.) $96.50
Carry Case Storage & transport case for dike sections All dike models up to 10 ft. $325.97

Small & Portable Containment Solutions

Small and Portable Spill Containment Comparison
Feature Mini Foam Wall Portable Drum Berm Pop-Up Pool Spill DikeThis Product
Type Small berm with foam walls Quick-deploy or snap-up drum berm Emergency containment pool Modular urethane barrier sections
Has Integrated Floor? ✓ Yes ✓ Yes ✓ Yes ✗ No — perimeter barrier only
Deploy Speed Instant unfold Instant unfold or snap-up Instant pop-open Interlock sections on floor
Sizes 2×2 to 4×6 ft. 2×2 to 10×10 ft. 20 to 250+ gallon 4 ft. and 10 ft. sections
Best For Under machines, tight spaces Drum storage, 1-4 drum containment Emergency drip catching, portable jobs Floor perimeters, drain protection
Price Range $167 – $279 $257 – $1,511 $69 – $459 $45 – $610
Shop View Mini Foam → View Portable Drum → View Pop-Up Pools → ✓ You're viewing this

Regulatory Compliance & Standards

This product supports compliance with the following regulations:

Helps Meet EPA Supports Environmental Protection Agency spill response requirements
OSHA Standards Supports workplace safety requirements under 29 CFR 1910
SPCC Plan Support Supports Spill Prevention, Control & Countermeasure requirements (40 CFR 112)

Expert Insights

When selecting the Lab Spill Containment Dike Tabletop, consider the flexibility it offers over rigid lab trays. Unlike fixed-dimension trays, this 4-foot urethane dike can be shaped into any configuration — circles, rectangles, or irregular shapes — to match your exact containment needs around specific instruments or bottle clusters. The 3/4-inch height is designed for tabletop drip and splash containment rather than large-volume spills. For higher-volume containment, use this dike in combination with a lab tray underneath for redundant protection. The urethane material is more chemically resistant than standard rubber and won't degrade from incidental UV exposure. Multiple dikes can be joined for longer perimeters, and the dedicated Storage Case (A2104LTU) holds dikes up to 10 feet long. If you need fixed containment instead, consider the grated UltraTech Lab Trays (A1060LTU for 17" or A1061LTU for 21") or the flat Eagle trays (A1677YLTE/A1677BLTE for 18"x36").
Travis Zdrazil PCI Products — 40 Years in Industrial Spill Containment & Safety

Lab Spill Containment Dike Tabletop, Orange | Industrial Spill Containment

Wholesale & B2B Information

Lab Spill Containment Dike Tabletop, Orange is used by industrial facilities, petroleum operations, fleet maintenance sites for laboratory spill containment. Supports OSHA and EPA SPCC spill containment compliance requirements. Volume pricing available. Free shipping to the lower 48 states.

Frequently Asked Questions

Lab Spill Containment Dike Tabletop, Orange

How do I shape the dike around equipment?

The flexible urethane material bends easily by hand. Simply press it into position around instruments, bottles, or work areas on any flat surface.

Can multiple dikes be connected for longer containment?

Yes, dikes can be placed end-to-end to create longer containment perimeters. The Storage Case (A2104LTU) holds dikes up to 10 feet long.

What chemicals can the urethane withstand?

Urethane resists most common laboratory chemicals including acids, bases, solvents, and reagents. Check compatibility for specialty chemicals.

Is this a replacement for a lab tray?

It serves a different purpose — the dike creates flexible, custom-shaped containment borders on existing surfaces, while trays provide rigid, self-contained sumps with defined volumes.

What is the difference between a spill dike and a berm?

Spill dikes are portable, modular barrier sections that you arrange in any configuration to contain spills on flat surfaces. Berms are complete enclosed containment systems with an integrated floor and walls. Use dikes for quick perimeter containment on existing floors; use berms when you need a complete containment basin including the floor.

Why Customers Choose AbsorbentsOnline

Facilities, field crews and government buyers have ordered from us since 1985.

Cross-Reference Guide

This product is compatible with applications that use the following part numbers:

  • UltraTech 2051