Industrial Safety Products - Facility Protection Products

Bollard Protection - Machine Safety Guards - Column Protectors - Corner Protectors - Wall Protectors

Steel Bollard Posts

steel-bollard-posts

Steel Bollard Posts 4, 5 & 6 inch round and 6 inch square bollard posts.

Description: Bollard posts are made of 1/4" thick steel and are 42" high. Each post is mounted on a 3/8" steel plate that is pre-drilled with 3/4" holes for installation. Posts have a very durable baked on powder coat. Safety yellow color for high visibility. The post cabs are black HDPE and are included with each post. The bollard post can be filled with concrete for extra protection. Anchor bolts are not included.

Uses: Bollard posts add extra protection to your facility. Prevent damage to walls, corners, racks and equipment.

Column Protectors and Guards

column protector

Column Protectors Fits round or square columns 6", 8", 10" & 12".

Description: These column protectors are made of 100% high-density polyethylene. Easy to install straps are provided to attach the two halves of the protectors. No tools are required. They will fit round or square columns that are 6", 8", 10" or 12". UV protected and can be stacked two high. Available in high visibility yellow, lime green or orange colors.

Uses: Use column protectors in your facility or warehouse to protect columns and beams from damage by forklifts and carts.

Corner Protectors - Corner Guards

building corner protectors

Corner Protectors in 21" & 42" lengths.

Description: Our corner guards are made of high density polyethylene. Are yellow in color and have UV inhibitors. Rust resistant for outside or inside use. Sold in two sizes in sets of two. Inside measurements of 4"x8" and outside measurements of 6"x10" with lengths of 21" and 42". Easy installation with bolts.

Uses: Use corner protectors on door frames, facility corners, H-frame racking or on loading docks. Protect your property from damage from forklifts, hand trucks and vehicles.

Wall Protectors - Wall Protection

wall protectors

Wall Protectors - Wall Protectors in 6" & 10" widths.

Description: Wall protectors are made of high density polyethylene. These yellow colored guards can be mounted end to end. They come in sets of two sections that are 42" long for each section. You can purchase 6" or 10" widths. Depth of wall protectors is 2". Anchors are not included.

Uses: Use to protect your walls from drums, forklifts and hand trucks. Use in drum storage areas, on loading docks or any where you have pallets against the wall.

Forklift Floor Mats

forklift safety mat

Description:This tough absorbent mat is cut in lengths to fit most forklifts.The forklift mat has a polypropylene top side to absorb any leaks and a non-penetrable backing with non-skid features. Color is dark charcoal gray.

Uses: Park your forklifts on the mat to absorb any oil or battery leaks. Helps to keep your floor safe from slip and falls. Protects concrete floors from stains and battery acid damage. Custom sizes available. Additional product information on order page.

Our Most Popular Products