Tank Repair Kit

Repair & stop leaks to keep your site safe when tanks or drums fail

tank repair kit
tank repair kit
tank repair kit
  Made In The USA

Quick Overview

  • Complete kit contains 43+ items to repair cracks, gashes and holes in tanks/drums
  • Our quality fuel tank repair kit lets you quickly control leaks of all shapes & sizes
  • Use "T" and ladder patches to repair large forklift tank punctures
  • Also includes various plugs, patches and sealants for small holes
  • Features quality 304 stainless steel hardware and components throughout
  • Kits available with standard steel or non-sparking hand tools

From $

Product Information

Our high-quality Tank Repair Kit includes everything you need for quick, emergency response to unexpected leaks or drum ruptures. It is well-stocked with more than 43 specialty tank sealer equipment items including wedges, plugs, patches, tapes, and repair putties. The kit also contains all necessary hardware tools for plug and patch installation. All repair kit contents come packed inside a durable, metal toolbox for convenient storage and portability.

This repair kit is suitable for small to large holes, punctures and gashes in plastic or metal drums, diesel fuel tank storage vessels and more. See below for the complete kit inventory list details, part re-order form and instructions.

These professional-quality kits are must-have items for emergency response and gas tank repair personnel, as well as towing and large vehicle/tank operations. We also offer a smaller version kit for Drum Leak Repairs, which comes without the straps and larger rubber/ladder and twin "T" patches.

Select Standard/Non-Sparking Tools

This kit is available with a standard stainless steel or non-sparking safety tool set option that is made of aluminum and bronze. In addition to offering protection from sparks that may cause fires or explosions, the non-sparking hand tools also feature non-magnetic and corrosion-resistant properties.

Non-sparking safety tools are an ideal option for industrial and high technology applications and environments with flammable and hazardous materials. Use non-sparking tools in hazardous drum and gas tank storage locations, or sites where combustible solvents, gasses or residues are present.

Contents Usage & Directions

  • Barrier Tape: Hang this bright yellow tape around areas of caution and to restrict access during leak repair activities.
  • Hot or Cold Hose Tape: Repairs smaller holes, pipes and hoses. For optimal application, use on clean and dry surfaces.
  • Lead wool: Use a screwdriver or knife to pack into hairline cracks or to repair stress fractures, welds, or connections.
  • Fix-Stix epoxy putty: Works to repair small holes and cracks on almost all surface types including metal or plastic fuel tanks. Knead until the color is uniform, then apply so it secures permanently and hardens like steel (20 minute cure time). Suitable for use on wet, round or flat surfaces as well as pipes, elbows, flanges, and potable water tanks.
  • Plug-N-Dike Plug Pattie: Insert this putty material directly into holes to form an immediate seal. It requires no curing time or surface preparation and will adhere to dirty, rusty or greasy surfaces without the need for additional cleaners/degreaser/chemical removers. The PND pattie is an excellent sealant option for metal fuel tanks or to control flammable/hazardous leaks.
  • "T" Patches: For irregular shape holes/gashes/cracks or elongated skin breaks. The wide surface area has a generous 1/4" thick neoprene pad on the facing and stiff, curved stainless steel back-up plate. Use the same application as a ball plug except the T-bolt straddles the crack.
  • Twin "T" Patch: Assemble patch so it will fit the medium to large size hole, using one or both of the T bolts in the appropriate position to seal the leak.
  • Screw Patches: These stainless steel sheet metal patches have neoprene compression seals to restrict and stop flow and are Ideal for pinholes. Take care not to screw too tight and strip the hole during installation.
  • Hard Rubber/Ladder Patch/Straps: Wrap straps around the leaking vessel, position over the top of the rubber patch and its wood support ladder, then tighten.
  • Neoprene/Foam: These materials are useful as an extra gasket sealant to assist as necessary for successful hole repairs.
  • Rubber mallet/drift pin: Use to round holes prior to patching. The mallet may also be used to drive wooden plugs (with or without absorbent pad wrapping) into repair areas.

Technical Information

  • This kit is only intended for use by trained/experienced Hazmat personnel. Suitable for temporary spill control until the appropriate disposal of the container, or, a permanent repair is possible.
  • Always ensure proper protective clothing is worn during any repair operation.
  • Before use, identify the chemical you are working with and know its compatibility with the neoprene, rubber, and stainless/plated steels materials in these patch kits.

Kit Contents

Qty

Item

1 Red, heavy-duty metal storage and carrying case (8" x 8" x 18")
1 OSHA-approved roll of barricade tape (200’)
1 Stainless steel plate with neoprene compression seal (8" x 12")
3 Stainless steel T-bolts for 8" x 12" plate (with pre-assembled wing-nut washer combos)
1 Hard Rubber Patch with hardwood cribbing support ladder (8" x 12")
2 Heavy-duty nylon straps with ratchet buckles & rubber coated hooks (22')
2 Toggle-bolt ball plugs (#1 and #3)
6 Toggle-bolt taper surface plugs (#4, #6, #8, #10, #11.5 and #13.5)
2 Stainless steel and neoprene T-bolt crack patches (#1 and #3)
5 Self-tapping sheet metal screw patches with neoprene compression seals (#6, #8, #10, #12, #14)
9 Assorted pre-shaped wooden wedge plugs
1 Tube Fix-Stix epoxy putty
1 Plug-N-Dike Plug Pattie (10oz)
1 Lead wool pack (2oz)
1 Hot/cold hose repair tape
1 Absorbent pad (18" x 18")
1 Solid neoprene material foam patch gasket (8” x 12”)
1 1/4" Foam (18" x 22")
1 Drift pin (steel or non-sparking)
1 (ea.) Rubber mallet safety hammer, pliers and screwdriver tools (steel or non-sparking) for installing all patches

Additional Product Information:

Download more information, instructions, and find individual part numbers to re-order replacement kit items below:

Ordering & Shipping

Purchase your heavy-duty fuel tank repair kit from AbsorbentsOnline.com today! Please contact us by email or call toll free (800) 869-9633 if you have any general, or, checkout, order and shipping questions.

Pricing and Order

Item Description Our Price Quantity
AAEEC-NS
AAEEC-NS tank repair kit (non-sparking tools)
AAEEC-NS
AAEEC-NS tank repair kit (non-sparking tools)

Tank Repair Kit – For Drums and Tanks
Non-Sparking Tools. See parts list above. Weight 35 lbs.

$933.97
Others Charge
$1090.00
$933.97
Others Charge
$1090.00
Quantity
AAEEC
AAEEC tank repair kit (regular tools)
AAEEC
AAEEC tank repair kit (regular tools)

Tank Repair Kit – For Drums and Tanks
Regular Tools. See parts list above. Weight 35 lbs.

$671.97
Others Charge
$785.00
$671.97
Others Charge
$785.00
Quantity

 

Thank You for Shopping With Us Today!

Our Most Popular Products